GongYi HengYuan Industry Co.,Ltd

Home » Charcoal Furnace

Charcoal Furnace

Charcoal Furnace is our new model air-flow type furnace, which makes high density &quality charcoal from wood logs, coconut shell and so on

Charcoal Furnace
Charcoal Furnace is our new model gas-flow type furance, it could deal with different type of materials, such as wood logs, coconut shell and so on
What is Charcoal furnace Capacity
One set furnace could deal with around 4.5-5ton raw materials
We could do two sets, three sets, four sets connecting together to get higher capacity
What is per set consisted of 
One set= one main furnace+ three inner baskets+ hoisting tools+fan+(cooling system tank, free choice)
What is charcoal furnace raw materials?
Wood logs, wood branches, sawdust briquettes ,biomass waste,
Coconut shell, Macadamia nut, cashew nut shell, bamboo and so on
What is the carbonization rate and fixed carbon 
Humility  carbonizing rate heating value    fixed carbon
wood20%      33-35%    6000-6500       60-70%
Wood log 30% 22-25% 6000-6500          60-70%
coconut shell20% 30-35% 7500-8000       76.8-85%
briquette bar10% 40-50%    6700-7500       69-80%
bamboo   30%      30-35%    7000-8500         65-75%
What is charcoal furnace  working process
Charcoal furnace  divides into three working process:
A: heating process: after putting the inner baskets intot the furnace, we need to heat the furnace up to 80-120mins, we could use gas or biomass waste as fuel, when temperature get around 280-330℃,we stop heating
B: Carbonizing process: after doing the sealing works, the materials inside begin to pyrolysis, it will produce gas at this period, so we need heating in this process, the carbonization time is often around 8-12hours
C: Cooling process: after carbonizinh, we need to take the inside furnace out, let it cool by natural way, cooling time longer, it is better for charcoal quality
D: After taking the inner baskets out, we need to put another baskets inside, this is the cycling process
Furnace materials and size
Main furnace: It is with steel plates, and refractoies,
Inner baskets: around is 5mm thickness, bottom is 8mm steel plates
Size : e inner baskets diameter are 1460mm, 1430mm, and 1400mm, height is 1.52m, so the inner stove
volume is 2.54 CBM,2.43CBM and 2.34CBM

 

Furnace materials and size
Main furnace: It is with steel plates, and refractoies,
Inner baskets: around is 5mm thickness, bottom is 8mm steel plates
Size : e inner baskets diameter are 1460mm, 1430mm, and 1400mm, height is 1.52m, so the inner stove
volume is 2.54 CBM,2.43CBM and 2.34CBM
What is charcoal furnace advantage of the furnace
1. High carbonization rate( you will get the carbonization ratio from the following
information) and high output
2. energy-saving ( 1000kg charcoal just need 30kg firewood or 15kg liquid gas
for heating)
3. smokeless , little pollution ( we have two important system to recycle and
purify the smoking and gas flow, and the 95% smoking will be reused for heating
the stove again, and the heating resource can use the liquid gas, so no pollution
the introduction see the following information)
4. easy for loading and unloading ( we will send some steel basket for you to
loading the wood and keep the good look of the charcoal
5. easy for transport, save much transport charge ( the inner stove can be stack
together when loading, it will save almost 50% space, it will save much money)
6.suitable for all kinds of raw material ,especially for the coconut shell, palm shell

 

The following is our charcoal furnace shipment picture, it is hot sale in Malaysia, India, Malaysia, Kenya, South Africa and so on

 

Charcoal furnace ship to Vietnam
In Vietnam, it has enough raw materials, such as wood logs, coconut shell for doing carbonizing, our charcoal furnace gets very good comments from clients

Charcoal furnace raw materials.

it is normally the wood logs, coconut shell, wood branches, argo waste, pellets, other biomass waste

 

charcoal furnace raw materials
Charcoal furnace could be suitable for different raw materials, such as wood briquettes, wood logs, coconut shell, palm shell.

Charcoal furnace make high quality charcoal

What is usage of charcoal? the answer is that 90% charcoal is for BBQ, when we make the charcoal, do not add binder, and chemical materials, so our charcoal is very heathy.and could do very deliciouse food.

Charcoal furnace make high quality charcoal
Charcoal furnace makes very high quality charcoal.when doing BBQ by our charcoal, it could get very delicious food.